TPR
TRIM PLASTIC RESTORE
TPR is designed to:
- Evenly revitalize faded plastics
- Protect over time from UV rays, acid rain, smog, and washes
- Slow progressive oxidation
- Stabilize texture and color without altering them
- Seal the surface, preventing new contamination
Share
Unpainted car plastics change over time.
Sunlight, temperature fluctuations, frequent washing, chemical and atmospheric agents act day after day.
The result is clear to see: grayed bumpers, dull trim, dry seals, lifeless surfaces. The original black turns gray. The material loses elasticity.
It’s not neglect: it’s normal aging.
TPR by Labocosmetica was created to address this problem with a concrete approach: it doesn’t cover, it doesn’t disguise, it doesn’t dye. It protects.
Not a dressing. A coating.
TPR is a true protective coating designed for plastics, vinyl, and rubber.
It contains no pigments, does not artificially color: it doesn’t disguise, doesn’t cover, doesn’t fake.
Its action is both physical and chemical. It seals the surface, isolates it from external agents, and stabilizes its appearance over time, slowing aging and protecting the original finish.
It doesn’t just “mask” fading: it stops the oxidation process at the root, working where others stop.
Even on slightly grayed plastics, it restores the depth of the natural black, enhancing the authentic texture of the material.
The result is clear: a satin look, dry to the touch, never shiny.
No wet effect, no plastic-like look.
It keeps the appearance stable over time, preventing the plastic from slipping into oxidation.
It slows progressive fading, without altering the visual identity of the plastics.
A natural, technical look, consistent with the original surface.
Those who know true detailing recognize the difference at first glance.
Instructions:

Cleaning and preparation
- Use Ductile or Traffic Film Remover Libera, depending on the type of dirt
- Thoroughly degrease with Veritas
- Completely dry with a microfiber cloth

Application
- Pour a small amount of TPR onto a sponge or microfiber applicator
- Work on small sections
- Carefully spread until fully absorbed

Finishing and curing
- Let it sit for about 1 minute
- Finish with a dry cloth to remove any excess
- Avoid contact with water for at least 24 hours
- For maximum effectiveness, wait 7 days before exposing to washing or rain

Maintenance
- Wash the vehicle using the Labocosmetica 3pH cycle to avoid compromising the protective film
- Reapply TPR every 12–24 months depending on use and environmental conditions
Results:
Dilution:
Car parts
Materials
Type
TPR
Where to apply
TPR can be used anywhere there is unpainted plastic or rubber.
It’s designed for the entire vehicle:
- Bumpers
- Handles
- Mirrors
- Front and lower grilles
- Engine bay plastics
- Wheel arches
- Door sills
- Spoilers
- Pillars and roof trims
- Dashboard
- Door panels
- Center console
- Tunnel and seat frames
- Interior trunk plastics
What to expect from the result
- No glossy or wet effect
- Satin, natural, non-reflective finish
- Visibly deeper color, without pigments or dyes
- Dry, clean touch
- Real durability over time (minimum 3 years)
It doesn’t cover. It doesn’t transform.
It enhances what the material already is.


Details that make the difference
- No silicone: compatible with wrapping, painting, and any subsequent work
- Does not alter the original surface: no films, no fake effects
- Does not attract dust: dry to the touch, non-sticky
- Makes plastic easier to keep clean, thanks to its water-repellent protection
Controlled aging
TPR doesn’t stop time, but slows it down intelligently.
It keeps the appearance of plastics more stable and uniform over time, preventing rapid degradation. TPR is a coating for those who understand that plastic should be treated like paint: with respect, with method, and with a product that does what it promises.
It doesn’t change the plastic. It keeps it as it should be.
Clean, consistent, protected. TPR by Labocosmetica. The ultimate solution for plastic protection.
