



















PURÌFICA
DECONTAMINANT SHAMPOO - ACID
Purifica is the industry's pioneering acid shampoo , the first in the car detailing sector, and it is still extremely innovative even today. Its primary function is to eliminate the thin layer generated by lime residue that builds up on the vehicle’s bodywork. This light formation of mineral contamination can sometimes be invisible, but it is the main cause of a loss of brightness because it builds up over time and makes the car appear duller.This effect is particularly evident on black vehicles.
Share
Purifica is the industry’s pioneering acid shampoo , the first in the car detailing sector, and it is still extremely innovative even today. Its primary function is to eliminate the thin layer generated by lime residue that builds up on the vehicle’s bodywork. This light formation of mineral contamination can sometimes be invisible, but it is the main cause of a loss of brightness because it builds up over time and makes the car appear duller. This effect is particularly evident on black vehicles.
Therefore, it is fundamental to use this shampoo not only as a rejuvenating treatment for protection and coating, but also as a routine product for vehicle upkeep.
Limescale particles are deposited on the bodywork by atmospheric events such as summer storms, acid rain, snowfall, or simply after poor drying of the vehicle. These deposits drastically reduce and inhibit the beading effect and water run-off.
Purifica tackles the problem at the root, delicately and effectively dissolving the limescale deposits on the bodywork. By so doing, it returns vitality to the coating or the protection applied, enhancing and bringing back to life the characteristics of the previously applied nano coating and sealants without having to reapply them.
This will allow you to see whether the coating or protection were actually damaged or if their action was simply hindered by the limescale build-up.
Purifica is also excellent as a pre or post polish thanks to its deep cleaning capacity.
Compared with untreated vehicles, in addition to the advantages already mentioned, using Purifica in the final foam washing phase provides the following benefits:
- It eliminates the previous surfactants that may interfere with the wet coat.
- It prevents greying of the plastic parts
- It brings the colours back to life, especially on dark cars greyed by limescale
- It reduces the problems of limescale formation during the drying phase.
- It makes drying much faster because there is less water to remove.
Purifica shampoo is extremely versatile and can be used at different dilutions, depending on your needs.
Here are the various modes of use depending on the severity of the contamination:
- dilution in foam gun from 1:5 to 1:10
- dilution in pail from 1:100 to 1:400
- dilution in atomiser 1:100 (one cap of product – 10ml – for every litre of water) or 1:200 (1 cap every 2 litres of water)
How to use:
- To maintain clean and purify surfaces protected by Nano Coating, we recommend using Purifica in a pail, diluted at a ratio of 1:400 (equivalent to 4 caps in 10 litres of water).
- In the case of sandy rain, mineral residues or vehicles exposed to the snow, we recommend using Purifica in a ratio of 1:5 in a foam gun, followed by a mechanical action with a wash pad dampened with Purifica diluted in a pail at 1:400.
- To apply the 3pH® technique as the first step, dilute Purifica at a ratio of 1:10 and spray it with a foam gun before sponging with a neutral shampoo. If you do not have a foam cannon, you can use a prayer with a dilution of 1:200 (one cap of product in 2 litres of water). Spray it over the entire car and then proceed with a shampoo wash.
- To remove the surfactants after the wash and to favour better adherence of wet coat or ceramic shampoo, dilute Purifica in the foam cannon at a ratio between 1:10 and 1:20.
- To remove more stubborn limescale deposits, or to renew ceramic coatings on wheels, we recommend diluting Purifica at 1:30 and spraying it directly on the surface, on a glove or on a brush. This solution is particularly suitable for more contaminated areas such as emblems, chromium letters, plastic trim around the windscreen wipers, door jambs, the rear area and boot of the car, especially after events such as snowfall or sandy rain, particularly if the latter has remained on the surface for a prolonged period of time.
For stubborn marks, limescale or mineral deposits such as rust and cement spots, we recommend Energo by #Labocosmetica.
Instructions:
Results:


Dilution:
Car parts
Materials
Type

P102 Keep out of the reach of children.
H318 Causes serious eye damage.
H315 Causes skin irritation.
P280 Wear protective gloves / goggles.
P302 + P352 IN CASE OF CONTACT WITH SKIN : wash with plenty of water.
P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
P332 + P313 In case of skin irritation: consult a doctor.
P337 + P313 If eye irritation persists, consult a doctor.
Contains Quaternary Compound. It can cause an allergic reaction.
Contains: sulphonic acids, C14-16-alkan hydroxy and C14-16-alken, sodium salts, Cocamidopropyl Betaine, Ethoxylated Fatty Amine
PURÌFICA
SAFE FOR PROTECTIONS
This washing product does not damage the existing layers of protection and only removes dirt.


WHY ARE THE WATER STAINS PRESENT?
If water is not completely removed after rain or car washing car , substances such as dust and minerals present in the water droplets remain on the surface. Minerals such as limestone , which are not visible to the naked eye, cannot be removed with a neutral / alkaline shampoo , which is the main cause of breakage of the layer of the protection coating.

The limestone particles that are deposited on the bodywork, due to imperfect drying, summer storms or acid rain , drastically reduce the beading effect. PURIFICA solves the problem at the source, effectively but delicately dissolving and removing the calcium deposited on the bodywork or the residues of contamination from rains acid thus restoring the appearance of the coating as just applied. This nano-shampoo maintenance at acid pH, a real novelty in the world of detailing , presents a blend of acids noble buffered.
Extremely innovative, the product eliminates the thin patina generated by limestone residues and which is deposited on the bodywork, enhancing and reviving the characteristics of the nano-coatings and sealants previously applied.
The unbuffered noble acids, specially developed for this shampoo, also allow PURIFICA to respect the layers of wax and protection.
PURIFICA has been the subject of careful research, development and tests in laboratories MaFra in collaboration with the most prestigious manufacturers sports car from all over the world for the launch of new models.

