PRÌMUS 2.0
FOAM PREWASH - ALKALINE VDA CERTIFICATE
PRÌMUS 2.0 is the first pre-wash in the detailing world to obtain VDA certification, an independent German body that certifies the compatibility of chemical products on the most delicate materials on cars and motorcycles.
PRÌMUS 2.0 is in fact an alkaline detergent free of free caustic salts. It maintains its excellent qualities in complete safety on any paint and material, even the most delicate present on sports cars and motorcycles.
PRÌMUS 2.0, PURÌFICA, SÈMPER and REVÌTAX are part of the 3ph combined car wash cycle of #Labocosmetica.
Share
► PRÌMUS 2.0 is the first pre-wash in the detailing world to obtain VDA certification, an independent German body that certifies the compatibility of chemical products on the most delicate materials on cars and motorcycles.
► PRÌMUS 2.0 is in fact an alkaline detergent free of free caustic salts. It maintains its excellent qualities in complete safety on any paint and material, even the most delicate present on sports cars and motorcycles.
► PRÌMUS 2.0 has a cleaning power and a safety of use at the top of its category. Easily eliminates midges, resins, road dirt even the most anchored, without mechanical action.
► PRÌMUS 2.0 is very versatile in various dilutions of use: it can clean rims, wheel arches and all the most delicate parts of the bodywork. great ease of rinsing.
►Moreover, thanks to its low evaporation characteristics, it can also be applied with normal spray dispensers, preventing annoying product residues dried in the drying phase.
► PRÌMUS 2.0 thanks to its particular formula can be used without contraindications on surfaces treated with waxes, sealants or coatings. PRÌMUS 2.0is the result of the research and development of Mafra laboratories and has been thoroughly tested in collaboration with the most prestigious sports car manufacturers in the world.
For cleaning rims and tires dilution 1:3 up to 1:10; for cleaning of parts low of the car , side members , bumper or removal of midges 1:20 dilution; for cleaning very dirty cars dilution 1:50 dispensing the product from bottom to top; for washing medium-dirty cars dilution 1:80 by dispensing the product from bottom to top; for frequent washing 1: 100.
DISPENSING WITH FOAM GUN SYSTEM : in this case it is advisable to respect the normal dilutions obtaining delivery output such as those recommended with spray dispenser above describe. The final dilution varies according to the pressure washer used. We generally recommend diluting PRÌMUS 2.0 1:5 for winter dirt , 1:10 for summer dirt . After application wait a few minutes and rinse with high pressure .
Instructions:
Dilute 1:5-1:15 depending on the degree of contamination or the condition of the vehicle, then soften with a foam gun for spray the foam on all the painted surfaces of the vehicle + wheels + rims.
Rinse after 3-5 minutes.
In a bottle dilute the product with a cap 1:5 and spray on the lower part of the bodywork: most of the pollution accumulates under the vehicle.
Remove the spray gun, connect it to the foam gun and coat the entire vehicle with foam again.
Wait 3-5 minutes and rinse.
Results:
Dilution:
(FOAM GUN)
(FOAM GUN)
(FOAM GUN)
Car parts
Materials
Type
P102 Keep out of the reach of children.
H314 Causes severe skin burns and eye damage.
P280 Wear eye protection / face protection.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): immediately remove all contaminated clothing. Rinse the skin / take a shower.
P305 + P351 + P338 IF IN EYES, rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
Contains: potassium hydroxide, edta.
PRÌMUS 2.0
SAFE ON PROTECTIONS
This washing product does not damage existing protective layers and only removes dirt.
PURPOSE OF THE PREWASH
This detailing phase, known as pre-wash, can be essential to avoid the formation of circular halos when washing the car.
The concept behind pre-wash is to remove light contaminants, such as road grime, road salts and insect splashes, which are found on the paint of your vehicles.
SUPERMAFRASOL: is a flagship product of MaFra, which boasts a strong and powerful detergent, but can cause the appearance of white spots in sensitive materials if the product is not sufficiently diluted.
PRIMUS 2.0: has excellent cleaning power, but is safe for all materials and has obtained the VDA certification mark.
WET FOAM, EASY TO RINSE
PRIMUS 2.0 is a moist foam. The foam allows you to wash the vehicle quickly, as it does not stay on the vehicle for long but dissolves quickly removing contaminants.
HYBRID USAGE
If the dilution ratio is adjusted to the degree of contamination, the entire vehicle can be spray washed or foam gun washed.
