FIERO
SUPER REFINISHING PRIMER WITH S.A.M. TECHNOLOGY OPTIMAL COATING PREP
FIERO is an innovative and refined water-based primer without wax or silicones . It does not cover defects but eliminates leaving on the treated surface a pure and true finish with an extreme and deep gloss, creating the ideal condition for the application of nanoceramic coatings.
Share
Our primer was designed precisely to prepare the surface for the subsequent coating application phase thanks to the innovative SAM technology (Self Assembled Monolayer), guarantees a strong and lasting link between the surface and the applied coating nanoceramic including the our sealant CUPÌDO. Traditional primers that use resins and fillers to achieve an excellent finish take a long time to bond to the paint, usually 6 to 12 hours of waiting! With FIERO all this does not happen because it allows the application of the chosen coating immediately after the finishing phase , thus saving the detailer a lot of time. FIERO is a super sincere finish, it does not fear IPA and is compatible with all coatings that require UV lamps without any loss of Gloss .
► FIERO in fact it does not contain resins or fillers (fillers) or waxes, its formula is composed of a careful selection of synthesized abrasives that adapt to the surface thanks to the innovative “ Adaptive Abrasive Technology “. This technology allows to obtain a always perfect and pure finish on both soft and hard paints .
► FIERO allows you to shorten processing times on any type of paint and expresses its maximum finishing capabilities in the presence of sensitive surfaces such as reflow, soft and sticky. While, in the presence of hard or ceramic surfaces, it allows you to close the job in just 2 steps in combination with our compound AUDACE . For these reasons FIERO is the solution that detailers were looking for.
With the random orbital, spread the product evenly at a constant 4.5 speed over an area of 40x40cm until the primer is used up. Recommended medium soft yellow or soft black buffer.
Instructions:
With random orbital, spread the product homogeneously at constant speed 4.5 over an area of 40x40cm until the primer is used up.
Recommended pad: medium soft yellow or soft black .
Results:
Dilution:
Car parts
Materials
Type
P102 Keep out of the reach of children.
Contains mixture of: 5-chloro-2-methyl-2 H- isothiazol-3-one, 2-methyl-2H-isothiazol-3-one (3: 1). May cause an allergic reaction.
FIERO
EXTREME GLOSS
It does not cover defects but eliminates them leaving on the treated surface a pure and true finish with a gloss extreme and deep, creating the ideal condition for the application of coating nanoceramics .
QUICK APPLICATION
FIERO is an innovative and sophisticated water-based wax-free and silicon-free refinishing primer.
- Resin, filler, and wax free (does not contain fillers).
- Drastically reduces working time.
- High gloss: does not fade under UV light or after the use of IPAs.
Traditional primers that use resin or fillers to obtain a strong refinish require long curing times
to bond to the paint, usually between 6 and 12 hours with FIERO all this does not happen!
