Kit Coating #STC + #HPC
Kit Coating #STC + #HPC
Kit Coating #STC + #HPC

Kit Coating #STC + #HPC

Kit coating


Description

#STC Permanent nano coat, 70% physical 30% chemical
S for SILICON - The precise spatial layout of Silicon surrounded by Oxygen guarantees perfect adhesion to the surface and a more effective protective shield
T for TITANIUM - TiO2 (Titanium Dioxide) is currently the most innovative coating solution thanks to its self-cleaning ability and resistance to chemicals.
C for CERAMIC Coating - The chemicalphysical blend uniquely combines the hardness and flexibility of the glass layer, provides a highly reflective vitreous gloss that lasts throughout the life cycle of the treatment.

#HPC paves the way to a whole new category of coatings dedicated to the overcoat. Thanks to its “nano hydro-gel system” technology, it creates a hydrophobic membrane with a polymeric matrix made up of “building blocks”, which form lattices and adhere directly to the surface at room temperature, creating a highly resistant and elastic layer.
#HPC is resistant to chemical, saline and uv ray attacks which cause corrosion and non-removable stains it also has antifouling properties its distinguishing feature is its antistatic and antifouling capacity, leaving the car clean for longer.
The #HPC coating can be applied alone or as a protective agent on other #labocosmetica coatings (top coating) this membrane creates a three-dimensional gloss that provides deep shine and enhances the colour of the paint.

The #Labocosmetica coatings were subjected to different stress tests first in the laboratory and then directly in the field thanks also to the collaboration of different international detailers.

We have selected the cities with the most extreme climatic conditions in the world: Dubai (United Arab Emirates) for the scorching heat and its sandstorms, Delhi (India) and Manila (Philippines) for the suffocating smog and the tropical heat, Moscow (Russia) and Gothenburg (Sweden) for the cold and the road conditions, in addition to the major European capitals where the climatic and road conditions are certainly more normal.

It should be noted that for the entire duration of the tests it was not always possible to comply with the coating maintenance program recommended by us.

This allowed us to verify the condition of the treated surface in the worst situation.

With the results of the numerous tests we have made a weighted average where it can be seen that one year of life of our coatings is approximately 15,000 km.

Based on this data, we can therefore state that:

- Duration of #STC + #HPC is 90,000 km or 6 years

  • EAN: 8005553021894