#AUDACE 250gr

#AUDACE 250gr

Supreme Cut Compound


Description

Supreme Cut Compound
#AUDACE is a water-based compound with high cutting capacity at low speed. This is possible thanks to a selection of state-of-the-art abrasives, which will allow you to cut using a random orbital polisher similar to those obtained using a rotary polisher, thus reducing required time by up to 50% compared to traditional compounds. With #AUDACE, required time can be reduced by up to 50% compared to traditional compounds. This versatile compound is particularly appreciated by detailers, as it can be used even in the most  difficult situations, allowing them to save time and money. It is the “Cold Cut Technology™” that ensures such results, allowing major flaws to be eliminated  at low speed (1200 rotations with rotary polisher or 4.5 speed with random orbital polisher) and the risk of holograms to be reduced. This technology also means less time and product will be required, and the polishing process will be much easier. #AUDACE works particularly well on hard surfaces or state-of-the-art ceramic. However, using the right pad, it proves to be a very versatile product suitable for any type of surface. #AUDACE was created to eliminate deep scratches, even those left after 1000-grit sanding. Incredibly, despite its high cutting capacity, it ensures a medium polish finish! #AUDACE is easy to remove, also from sticky paints, and it does not leave traces of dust. #AUDACE is really easy to use, does not contain paraffins, fillers or leave dirty gaskets. The result is a finish that allows the completion of the polishing process in only 2 steps using our #FIERO refinishing primer. 
The whole #Labocosmetica® polish line is odour-free and ‘VOC FREE’.

Recommended pads:

with a rotary polisher, we recommend our wool pad and, in particular, our sponge pads, such as the blue one. With a random orbital sanders, we recommend the grey hybrid microfiber pad for a powerful result, or our blue pad for a more balanced cut.

INSTRUCTIONS FOR USE:

with a rotary polisher, initially use a 400-600-rotation speed, then gradually increase to 1000-1200 rotations and end with light pressure of 400-600-rotation speed. With a random orbital polisher, gradually apply a small amount of product evenly on a sponge pad at a speed of 1-2 on a 40x40cm area, then use the maximum speed to polish until the product is no longer visible.

VALIDITY TERM 5 YEARS - PRODUCTION DATE: SEE AT THE PACKAGE. PRODUCTS USED BY TOP DETAILERS.

  • EAN: 8005553021993